2nd wave arms procurement program Attn weapons suppliers etc
Sarrowquand
26-03-2009, 02:37
During the initial tensions surrounding Greikland and a potential New Caribbean conflict the Bureau of military management authorised many military reforms to bring the countries fire power up to standard to ensure both the protection of Sarrowquand and also the defence of its smaller allies. Even as weaponry began to stream into the country and new force formations were levied the danger of a direct conflict began to die down, led by Conservationist Speakers and backed quietly by Silinky’s Speaker’s party the people protested against the large military build up, whilst the Speakers of the Innovation and New Radical parties were able to defend most of Unified Command’s new budget as well as the structural reforms, including training and recruitment they lost the battle to maintain the large scale procurement of new weaponry for the Dominion’s army.
The dove Speakers of the time were quick to halt the militarization of Dominion society through the increased level of firepower available to the military.
Now however the balance of public opinion has begun to shift enough for the Forum to reopen the debate on re-armament and weapons upgrade programs. With much of the budget untouched from the earlier debates and with current defence budget surplus much of the old equipment is likely to be replaced. Over the next few weeks the Speakers will be discussing the merits of weapons and equipment upgrades on a case by case basis.
In the meantime the Bureau of Military Management will be seeking arms contractors to award large scale contracts to for weaponry and hopes to buy from a small range of suppliers rather then a large group. They are also likely to, for the first time, set up annual orders for equipment rather then just one time import deals.
BMM Coordinator for Supply, Grey 1005
Bureau of Military Management Press release
………………………………………………………………….
Orange header rumour sheet:
Publisher Anon:
It is suggested that currently the preferred candidate for small arms and support weapons is Etoile Arcture.
The preferred candidate for naval orders Leistung
And the leader for air orders is Universal Defense
Rumour has it that BMM will also be open to, political incentives, personal incentives and purchasing incentives whilst deciding which groups to award contracts to.
Personnel involved in the 2nd wave arms procurement are:
BMM Director: Alice Nuise (Grey 1000)
BMM Coordinator Supply (Grey 1005)
DAFI Orders/Imports: (1622) (air force)
CG Orders/Imports:Sunken Obsidian (Grey 1623) (naval)
DSRA Orders/Imports: (Grey 1623) (regular army)
DSRF Orders/Imports: (Grey 1626) (reserve army)
DSSF Orders/Imports: (Grey 1625) (Special Forces)
DAaMU Orders/Imports: (Grey 1624) (armoured)
…………………………………………………………………………….
Any governments etc wishing to address the Council of speakers over arms issues are welcome to send telegrams to either the council as a body or to the main voices on this issue.
Speakers in favour of budget/quantity approvals are:
2nd Speaker Philip Ustone New Radical Party
4th Speaker Joseph Morgan Inovation Party
9th Speaker Pater Bondan New Radical Party
18th Speaker Saline Ashallin New Radical Party
22nd Speaker Serin Nefzen Undeclared Party
Speakers against the 2nd wave plans.
3rd Speaker Sky Blue Conservationist Party
10th Speaker Anna Trueshot Speakers Party
12th Speaker April Tide Conservationist Party
(ooc: If you want to go the route of bribes send your offers to the Greys not the Speakers, if you want to talk politics and support or disapprove of this plan then address it to the Speakers: If you already have ties with someone not on the list you can still address your letters to them and try and get them to take up your cause.)
Sarrowquand
26-03-2009, 02:38
Open Contracts:
Sharpshooter rifle
Light mortar
Medium mortar
Heavy mortar
Light AT weapon
Anti tank (AT)
Anti structure munition
Anti air
Anti artillery
Filled Orders:
Support Weapons Contract (2) discussing budget and quantities for:
SnipSmall arm and support refit bill (1)
Incoming service pistol (a): 8,000,000 (EA)
Incoming service pistol (b): 3,000,000 (PM)
Assault Rifle: 5,500,000 (EA)
Submachine gun: 3,000,000 (EA)
Carbine: 100,000 (EA)
Light machine gun: 500,000 (PM)
Medium machine gun (GPMG): 400,000 (PM)
Heavy machine gun (HMG): 500,000er rifle (PM)
Under discussion:
Spending so far: 20,245,000,000 USD
Maximum budget across all orders (to be approved): 33,000,000,000,000 iNY (38,940,000,000,000 USD)
(edit ooc: looking good so far guys)
The Phoenix Milita
26-03-2009, 12:18
Encrypted - Confidential
To: Alice Nuise, Director, BMM
From: Robert Merillion, CFO, Phoenix Dynamix, INC.
Phoenix Dynamix would like to bid on the lucrative small arms contracts you are offering. Phoenix Dynamix is one of the oldest and largest arms manufacturers in the world with a massive production capability and plentiful resources. While it is usually enough that our products are of the highest quality, due to the nature of the contracts in your case, we are sure you will be inundated with a multitude of entries and that it will be difficult for you to sift through them all. Because of this, factor, we may be willing to - shall we say - go to 'extra lengths' to ensure you make the 'right' choice. To that end, I would like to meet with you directly, at your convenience.
For now, we have included basic descriptions and pictures of our products to give you an idea of what we offer. Please let us know if you would like more information on any or all of our offerings. Note that we have listed the retail price per item and deep discounts are given on bulk government purchases.
Service pistol
PHX Falcon Elite 10mm Pistol
http://img.photobucket.com/albums/v293/grunt74/NS1/Firearms/falconelitesmall2009.jpg
Action: double action only
Operation: Short-recoil operated semi-automatic
Safety: thumb saftey
Capacity:
.45ACP: 12+1
10mm: 13+1
.40 S&W, .357 SIG: 14+1
The PHX Falcon Elite replaced the PHX Hi-Power 10mm after many years of service on the front lines as the primary pistol of The Phoenix Milita, as well as in the military forces of countless other nations. Like the Hi-Power, the Falcon is a short recoil operated semi automatic handgun designed for use by military and law enforcement. Unlike the Hi-Power, the Falcon Elite is built on an entirely new frame, with cutting edge materials and construction techniques. Although partially polymer framed, a fully supported chamber ensures durability when dealing with the powerful 10mm round. The 1.7lb Falcon is elegant and functional, and would make a fine addition to any police department, military service or personal collection. From the carefully crafted grips to the sturdy magazine well, the Falcon leaves virtually nothing to be desired. The Falcon even has a combination slide/rail interface system under the barrel to allow for worry free accessory attachments. With the optional interchangeable backstrap AND frontstrap system, the user can customize the pistol to fit perfectly in his or her hand, adding or omitting curves, finger grooves, etc. There is even a choice of textured metal, polymer or wood grips! The Falcon is also available conventionally chambered in .357 SIG, .40 S&W and .45ACP for about the same price.
Retail Prices:
PHX Falcon Elite 10 (10mm Auto = $650
PHX Falcon Elite 40 (.40 S&W) = $660
PHX Falcon Elite 357 (.357 SIG) = $650
---------------------------------------------------
Submachine gun
MP-3 PHX "Hacksaw" Sub-Machine Gun
http://img.photobucket.com/albums/v293/grunt74/NS1/mp3newrender.png
Name: MP-3
Designed by: Phoenix Dynamix
Caliber: 9mm or 10mm
Operation: blowback
Action: semi/burst/full auto
Magazine capacity: 20 30 or 40 round magazine
Rate of fire: 760 rounds per minute
Effective range: ~200 meters
The MP-3 was designed as a lower cost alternative to the foreign produced MP-5 series of sub-machine guns. The latest MP-3 is available with several customizable options to choose from.
It can be ordered with or without a rail interface system, a choice between folding or collapsible stock, and a choice between 3 different trigger groups, (S-1-F, S-1-3, S-1-3-F). The same MP-3 has a 9.3 inch threaded barrel, integral iron sight and ambidextrous selector switch/mag release.
While weight varies depending on version and options, for reference the the 10mm version with retractable stock and sight rail weighs 6.25 pounds[TPM army issue].
Base Retail Price
$520
(we have many other submachine gun choices if you are not interested in the MP-3, please contact us)
---------------------------------------------------
For the Assault rifle, Carbine, and Light support weapon (LSW) we offer a single solution:
The AR-20 Nemesis (http://phoenixdynamix.proboards38.com/index.cgi?board=gunz&action=display&thread=51) series of weapons, which come in purpose-built variants to meet your needs.
The AR-20 series weapons were built around the 6.66mm Dante round, but perform equally as well with the more common 6.8mm Remington and 6.5mm Grendel round. The AR-20 models come in many configurations with barrels from 10.5" to 24", weigh between 7 and 9.6 lbs and can accept fixed, collapsible or fixed adjustable stocks. Please click the link for more info.
http://img.photobucket.com/albums/v293/grunt74/NS1/ar20mod1.png
The current mid-length carbine variant.
Retail Price:
$1700-1850
---------------------------------------------------
Light machine gun
MG-46 Rampage Light Machine Gun
http://img.photobucket.com/albums/v293/grunt74/NS1/MG46.jpg
Name: MG-46 Rampage
Action: gas operated, open bolt
Total Weight: 17lbs
ROF: 800 rpm
Range: 800 meters
Caliber: 6.66mm Dante, 6.8mm Remington SPC, 6.5mm Grendel
Capacity: 60 round drum, 100,120,200, 500 or 1000 round box
The MG-46 is a machine gun chambered in the accurate 6.66mm Dante round, but also available in other intermediate calibers designed to augment a rifle squad with suppressive fire superior to that of smaller automatic weapons. A tool-less quick change heavy barrel is standard as is an integral bipod and light weight polymer composite stock.
Retail Price:
$1,900
---------------------------------------------------
Medium machine gun (GPMG)
MG-45 Eliminator .450 cal General Purpose Machine Gun
http://img.photobucket.com/albums/v293/grunt74/NS1/MG45.jpg
Name: MG-45 Eliminator
Designed by: Phoenix Dynamix
Action: gas operated, open bolt (safe/semi/full auto 1/full auto2)
Total Weight: 25-28.5lbs
ROF: 20-400-800 rpm selective
Range: 800 meters
Caliber: .450 Phoenix (11.4x75mm), 6.66mm Longneck, 7.62mm NATO, 7.62x54R, 7.92mm Mauser
Capacity 40-60 round drum, 100,120,200, 500 or 1000 round box
The MG-45 is a general purpose machine gun chambered in the powerful .450 Phoenix round. While heavier than the MG-22 SAW, the MG-45 is more accurate and has a selectable rate of fire, which helps keep the barrel from overheating during low-intensity engagements. A carrying handle/sight rail system is included, and the MG-45 features a side mounted forward horizontal grip that can attache to the barrel to aid in easy, quick, tool-less barrel changes. An integral bipod is also included. Versions of the MG-45 in other, lighter calibers are available as well.
Variants:
MG-45 (infantry)
MG-45A (tripod or pintle mount)
MG-45B(coaxial vehicle mount)
Retail Price:
$3,500(all versions)
---------------------------------------------------
Heavy machine gun (HMG)
MG-115 15.5mm Heavy Machine Gun
http://img.photobucket.com/albums/v293/grunt74/NS1/Firearms/MG-115-1.jpg
Name: MG-115
Designed by: Phoenix Dynamix
Action: gas operated rotating bolt
Total Weight: 83.5lbs
ROF: ~615 rounds per minute
Maximum Effective Range: 1,200 meters (point target)
Maximum Range: 2500 meters (area target)
Caliber: 15.5x115mm
Capacity Two 32 round drums, two 100, 128, 200, 500, or 1,000 round boxes
The MG-115 is an advanced 15.5mm heavy machine gun designed to replace the MG-15. The dual feeding system of the MG-115 is based upon the system in our MG-15 which was in turn based upon the BRG-15.There are two variants, the MG-115 which is ideal as a commander's or emplaced weapon and MG-115B which is optimized for coaxial mounting.
Retail Price:
$6,250(both versions)
Defense Corporations
26-03-2009, 17:25
"A package came in addressed to you, ma'am," the secretary said as Alice Nuise walked into her office.
"Oh? Who's it from?" Nuise asked.
"Some company out in Singapore," she replied, handing over the package.
"Fair enough." Nuise walked into her own office, then opened the package. Hmm. A bottle of Cloudy Bay Sauvignon Blanc, in a wine cooler. A little box, with a 0.5-carat diamond ring. A note: "From your friends at Smith Armory, an appreciation of the hard work you do." And a small brochure, touting some of that company's products: the R-25 assault rifle (http://z4.invisionfree.com/NSDraftroom/index.php?showtopic=5459), the R-25C carbine (http://z4.invisionfree.com/NSDraftroom/index.php?showtopic=5459), the R-25L LMG/squad-support weapon (http://z4.invisionfree.com/NSDraftroom/index.php?showtopic=5459), the MG-6 GPMG (http://z4.invisionfree.com/NSDraftroom/index.php?showtopic=5759&view=findpost&p=3494564), and the MG-15 (http://z4.invisionfree.com/NSDraftroom/index.php?showtopic=5469&view=findpost&p=3467350) HMG.
Etoile Arcture
26-03-2009, 17:40
http://i27.photobucket.com/albums/c197/USCMC/nationstates/SequoiaSWW.jpg
Sequoia Weaponworks official sales solicitation
To: Grey 1005, Coordinator for Supply, Bureau of Military Management
From: Dr. Laurent Perillard, Head of Sales (International), Sequoia Weaponworks
Subject: Second wave arms procurement contract
Classification: Eyes Only, Top Secret
I write to you on behalf of Sequoia Weaponworks to thank Grey 1005 and the Bureau of Military Management for selecting our company as a preferred bidder for the Second wave arms procurement contract. I am pleased to inform Grey 1005 of the fortuitousness of this competition as my company is in the process of a far ranging product refresh designed to ensure Sequoia Weaponworks will continue to remain at the cutting edge of small arms technology.
Among new weapons and innovations to be introduced into our range includes a greatly enhanced model of our top-selling P270 Diablo handgun and a new laser diode visible light and infra-red aiming light. Our ranges of rifles and machine guns, that have been combat proven in Madurastan and Thive an adopted by ODECON, have also been improved for operation in the most hostile environemnts. This includes adption of new maintenance-free anti-corrosion lubricants and finishes, and incorporation of lighter, tougher and more durable glass fibre reinforced polyamides materials into all of our weapons.
Cognisant of your needs for a continious supply of modern and up-to-date weapons we can offer price competitive indefinite delivery/indefinite quantity (ID/IQ) contracts and a centralized electronic procurement system that greatly simplifies logistics. The centralized procurement process covers our full range of weapons and ammunition, tactical accessories and repair parts. Using these procurement processes it is a simple matter of re-ordering whatever is needed without going through costly and time-consuming contract award processes.
In addition to new production, our company can also offer design services to modify existing or develop new weapons, and training services for our export customers. Training solutions include Simunition force-on-force training ammunition (coloured-soap bullets) and MILES training aids to allow armed forces to rapidly train recruits or convert to a new platform.
All information regarding our small arms and products from our other divisions, including Sequoia-Allis Defence Services, Sequoia Defence and Aerodyne, can be found in my signature. If you have any questions or special requirements I look forward to discussing these issues in more detail.
/signed/ Dr. Laurent Perillard, Head of Sales (International), Sequoia Weaponworks
M.A.C Heavy Industries | Defense
We wish to present our products;
M.A.C- 56 5.56x45NATO Series Assault Rifles
http://i36.tinypic.com/k9uez7.png
Basically,the M.A.C-56 is an improved,lightened and refined SIG SG-550 series rifle manufactured under license in Anghele. The M.A.C-56 uses the same gas operated system,with gas piston removably attached to the bolt carrier,and with rotating bolt with two massive lugs. The recoil spring is located around the gas piston rod,above the barrel,and the bolt carrier attached to the gas piston rod by the mean of removable charging handle.The gas port has gas regulator with two different open and one closed position (latter for firing rifle grenades).
The receiver of all M.A.C-5X series guns is made from stamped steel which makes it very resistant and has two major parts, upper and lower,which are connected by pushpins. The barrel is screwed into the upper receiver.Corrosion issues with the Sig 55X line of rifles have been addressed in the M.A.C-56 and all metal parts are now coated with a super corosion resistant Maritime Finish.The trigger unit has a safety/fire selector switch on the left side of the receiver, with 3 settings: safe, semi-auto, full-auto.If desired, additional module could be installed in the trigger mechanism to allow 2/3-rounds burst mode. Rear sights are drum-type or carrying handle integrated red-dot sights (like those found on Heckler-Koch rifles).On certain current production models rear sight is replaced with full-length Picatinny style rail with folding back-up reat sight.
The M.A.C-56 has muzzle compensator/flash hider of NATO-standard diameter, so it is possible to launch rifle grenades from the muzzle and fit a sound suppressor.
The M.A.C-56 can be fitted with detachable folding bipods under the handguard, and is issued with side-folding, skeletonized polymer buttstock. Every rifle of M.A.C-56 family can be fitted with proprietary, quick detachable scope mount, although current production rifles are usually fitted with one or more picatinny rails. Export versions can be equipped with commercial telescope sights, ACOG or "red dot" sights, depending on customer preferences.The M.A.C-56 also can be fitted with bayonet. Standard magazine capacity M.A.C-56 rifles is 30 rounds.
Standard magazines are made of polymer can be clamped together for ease of carry,using the magazine studs on the side of the magazine walls.Further variants such as a Kurz (compact) model a mid-size battle rifle in 7.62 and a sniper rifle are being developed as well as a machine gun and 30/40mm grenade launching module.
Specifications:
M.A.C-56|A STD M.A.C-56U|ASD
-Caliber: 5.56x45mm | 5.56x45mm
-Magazine Capacity: 20 or 30 Rounds [100 Rounds Drums Available On Request]
-Rate Of Fire:760 Rounds/Min | 780 Rounds/Min
-Length: 998 / 772 mm | 833 / 607 mm(924 / 698 mm)
(Stock Open / Folded)
M.A.C-56U|ASD Equipped with 3.5x Optical Sight [Available Without Sound Supressor/Moderator Call For Pricing] : 1800€
M.A.C-56|A STD [Can Be Equipped With The "U" Version Optical Sight At An Additional Cost] :1100€
Domestic Production Rights : $720.000.000USD
----------------------------------------------------------------------
M.A.C-56/7 S.A.W
http://img12.imageshack.us/img12/8148/saw72.png
The M.A.C56/7-S.A.W is a magazine fed, light machine gun, based on the M.A.C-56/7 family of firearms and available in 7.62 NATO or 5.56 NATO. It utilizes the same action as the rest of these firearms: a gas piston irremovably attached to the bolt carrier, and with rotating bolt with two massive lugs. The recoil spring is located around the gas piston rod, above the barrel, and the bolt carrier attached to the gas piston rod by the mean of removable charging handle. The gas port has a regulator which has 3 positions: 1- regular conditions (~1050 rpm), 2- adverse conditions, such as mud or heavy fouling (~900 rpm), 3- closed gas system which allows firing rifle grenades. The trigger unit has a safety/fire selector switch on the left side of the receiver, with 4 settings: safe, semi-auto, 2/3 round burst, full-auto.
The receiver of the S.A.W is made from stamped steel which makes it very resistant and has two major parts, upper and lower, which are connected by pushpins. The receiver and body of the S.A.W are strengthened, when compared to the M.A.C 5X, to allow sustained firing at high rates of fire. The barrel is heavier and longer than the one used in the M.A.C-5X rifles, and is detachable. Each S.A.W comes with a spare barrel, to use in prolonged firing. All metal parts are now coated with a super corrosion resistant Maritime Finish. The M.A.C-S.A.W has muzzle compensator/flash hider of NATO-standard diameter, so it is possible to launch rifle grenades from the muzzle. Sights consist of an integrated dual-optic sight and “O-shit” popping back up iron sights. For night operations a night sight (not included) can be installed on the carrying handle.
The S.A.W is capable of using all magazines from the M.A.C-5X family, but its standard magazine is a 120 /100 drum magazine, depending on the version (5.56/7.62). While most common ammunition will work with the S.A.W, it is best to use heavier loads used for LMGs.
Specifications :
M.A.C-56 | 57 S.A.W
-Caliber: 5.56x45mm | 7.62X51mm
-Magazine Capacity: 120 rounds drum | 100 Rounds Drum (And any M.A.C-5X magazine)
-Rate Of Fire: 900-1050 Round per minute.
-Weight, empty: 8kg | 10kg
-Length: 1010mm/ 880 mm (Stock open / folded)
-Barrel length: 440mm
Price: $5.900USD
Domestic Production Rights : $1.200.000.000USD
----------------------------------------------------------------------
M.A.C 56C & SD | Commando S.M.G
Standard
http://img17.imageshack.us/img17/5251/mccomm.png
Integrally Suppressed
http://img6.imageshack.us/img6/7200/commsd.png
Specifications:
- Caliber : 5.56x45mm NATO
- Length (stock open / folded) : 730 / 504 mm
- Barrel length : 226 mm
- Weight empty : 3.0 kg w/o magazine
- Magazine capacity : 20 or 30 rounds (100 round drums available)
- Rate of fire : 880 rounds/min
Price: $900USD
Domestic Production Rights : $700.000.000USD
-----------------------------------------------------------------
M.A.C-56|SP
http://i34.tinypic.com/w8nxg4.jpg
Specifications:
- Caliber: 7.62mm NATO (.308WIN)
- Action: Gas operated,select-fire
- Barrel length: 680 mm
- Weight: 7,13 kg loaded with scope
- Length: 1195 mm
- Magazine: 5,10 or 20 rounds detachable box magazines (100 rounds drums available)
The M.A.C-56|SP is the 7.62NATO (Sniper) accurized variant of the famous M.A.C-56 assault rifle, manufactured by M.A.C Heavy Industries.
The M.A.C-56|SP is a good medium military marksman/sharpshooter rifle or police/antiterror rifle,capable of quick and accurate follow-up shots in either Semi-automatic or Fully Automatic operation (2/3rd burst available).
Price: $12.900USD
Domestic Production Rights : $5.700.000.000USD
----------------------------------------------------------------------
M.A.C - 56 | K & PDW
http://img16.imageshack.us/img16/2411/mac56k.png
Specifications:
- Caliber: 5.56x45mm Nato
- Weight: 3 - 3.5 kg without magazine (depending on variant)
- Length (stock closed/open): 410 / 640 mm
- Barrel length: 198 mm
- Rate of fire: 1420 - 1530 rounds per minute
- Magazine capacity: 15 or 30 rounds
- Effective range: 100-150 meters
The M.A.C - 56 Kurz SMG was developed and is manufactured by the famous Anghele based company M.A.C Heavy Industries. The M.A.C - 56 Kurz design is based on M.A.C - 56X series assault rifle.
The M.A.C - 56 Kurz SMG is in service with Anghele Armed Forces and Police.
Technically, the M.A.C - 56 Kurz SMG. is a recoil operated select fire gun, firing from closed bolt. The triger/hammer group and floating firing pin design is similar to M.A.C - 56, but the bolt is of new design. The receiver is similar in design to M.A.C - 56, and is of folding type (upper and lower receivers are assembled by two steel pins, much like the M16 receiver does). The M.A.C - 56 Kurz SMG has ambidextrous safety/fire selector switch with four settings - safe, single shot, 3 round bursts and full auto. M.A.C - 56 Kurz SMG can be manufactured with side-folding or fixed polymer buttstocks. Silenced (Schalldampfer) version, with folding buttstock and integral silencer is available for special forces use. M.A.C - 56 Kurz SMG has post front sight, ajustable wor elevation, and aperture rear sight, ajustable for windage. M.A.C - 56 Kurz SMG uses 20 or 30 rounds magazines made from transluscent polymer. Magazines had special studs and slots that allowed two or more magazines to be clipped together for quicker magazine change.
Red-dot sights available on request.
Price : [PDW] $910 USD [K] $870USD
Domestic Production Rights : $590.000.000USD
----------------------------------------------------------------------
M.A.C Type-147|U
A further improvement to the Avtomat Kalashnikova |AK-47 line of combat assault rifles manufactured by M.A.C Heavy Industries while retaining the low-cost per unit/high reliability ratio.
http://i35.tinypic.com/2jiud.jpg
Specifications:
- Caliber: 7.62x39Russian
- Rate Of Fire: 630 Rounds Per Minute
- Muzzle Velocity: 720 m/s
- Action: Gas-Operated, Rotating Bolt With Locking Lugs
- Firing Modes: 0-1/A-B-3/F-20 Trigger Group
- Sights: Red-Dot/Optical Type
- Ammunition Feed System: 30-Round Detachable Box Magazine (Also Compatible With 40-Round Box Or 75-Round Drum Magazines From The RPK)
- Weight: 3.8 kg With Empty Magazine
- Length:
- 870 mm With Polymer Stock Extended
- 645 mm With Polymer Stock Folded
- Barrel Length: 418 mm
Features:
- Folding Sharpshooter Stock
- Hensoldt Optical 3.5x Red-Dot Sight
- Muzzle Brake/Quick Attach Sound Suppressor
- Polymer Furniture To Avoid Melting At High Rates Of Fire
- Fluted Match Barrel
- Precision Two-Stage Trigger
Users:
-Anghele Armed Forces And Anghele Law Enforcement Units
-In Civilian Use In Anghele
-Far Echo Islands Armed Forces/Government And Law Enforcement Units
-In Civilian Use In Far Echo Islands
Number Of Units Sold:
-6.540.000x Units
Price: $300USD
Domestic Production Rights : $300.000.000USD
----------------------------------------------------------------------
M.A.C Type-147 | ASU
http://img253.imageshack.us/img253/733/mactype147asu.png
The M.A.C Type-147 | ASU has only minor differences from the basic M.A.C Type-147 | U assault rifle.
Specifications:
- Caliber: 7.62x39 mm
- Action: Gas operated, rotating bolt with 2 lugs
- Overall length: 735 mm (490 mm with folded buttstock)
- Barrel length: 215 mm
- Magazine capacity, 20 rounds standard
- Weight empty: 2,71 kg
- Effective range: about 300 meters
- Rate of fire: 850-985 rounds per minute
The M.A.C Type-147 | ASU has a severely shortened barrel, with the gas chamber moved back and appropriately cut down gas piston rod. Since the portion of the barrel after the gas port is very short, a special muzzle device was designed, which is used as a flash hider and the gas expansion chamber (to achieve reliable gas operated action). The front sight base is lowered, and the standard adjustable rear sight is replaced by the flip-up rear (marked for 200 and 400 meters distance), mounted on the receiver cover. The receiver cover is hinged to the receiver at the front and flips up when opened (original M.A.C Type-147 | U receiver cover is detachable). Otherwise the M.A.C Type-147 | ASU is similar to the M.A.C Type-147 | U, it has same controls and uses same magazines.The M.A.C Type-147 | ASU cannot be fitted with bayonet.A side-mounted rail for the night or red-dot scopes can be mounted as an optional,if so the designation becomes M.A.C Type-147 | ASUD
Price : $270USD
Domestic Production Rights : $280.000.000USD
----------------------------------------------------------------------
Type-147|U RPK
http://img360.imageshack.us/img360/2623/macrpkme8.png
The RPK is a gas operated, magazine fed, air cooled, selective fire weapon.The basic action,with a long-stroke gas piston located above the reinforced barrel and a rotating bolt, is similar to that of the Kalashnikov assault rifle.
The trigger unit and safety is also the same, therefore the RPK fires from a closed bolt in both semi-automatic and automatic modes.The barrel can be replaced in the field with a special tool included in the machine gun´s tool kit.RPK machine guns are fitted with integral folding bipods made from steel stampings.
The shoulder stock is adjustable in height and length.
Specifications:
- Caliber: 7,62x39 mm
- Weight: 4,8 kg empty
- Length: 1040 mm
- Length of barrel: 590 mm
- Feeding box magazine: Drum of 75 rounds,40 rounds box magazine
- Rate of fire: 900 rounds per minute
Price Per Unit: $450USD
Domestic Production Rights : $410.000.000USD
-----------------------------------------------------------------------
Type - 147 Box Magazines (For All Variants)
http://img6.imageshack.us/img6/8528/magazines.png
Pricing On Request
-----------------------------------------------------------------------
M.A.C Neofall 20x110mm Anti-Materiel Payload Rifle
http://img186.imageshack.us/img186/9205/as50caliberlop.png
Specifications :
- Cartridge: 20x110mm Hispano-Suiza
- Operation: Gas-impingement,semi-automatic
- Feed: 6-round box-type, detachable magazine
- Weight, empty: 28 kg
- Overall length: Data not yet available
- Rifling: 1 full turn in 560 mm
- Length of barrel: 1100mm
- Muzzle velocity: 895 m/s
- Muzzle energy: in excess of 36.000 joules
- Effective Range: > 2,000 m
Price : $ 14.000USD
-------------------------------------------------
M.A.C Heavy Industries Sthelios .50BMG Long Distance Sniper Rifle
http://i37.tinypic.com/11lprf8.png
Specifications :
- Caliber: 12.7x99mm / .50BMG
- Operation: Gas operated, semiautomatic
- Barrel: 792 mm
- Weight: 13.9 kg empty
- Length: 1369 mm
- Feed Mechanism: 5 rounds detachable box magazine
The Sthelios fifty caliber (12.7mm) sniper / antimateriel rifle is the latest development of M.A.C Heavy Industries.The Sthelios goal is to provide combat operators with highly accurate and rapid aimed fire at extended ranges.To achieve such goal, the Sthelios is built around gas operated, semiautomatic action, with single rear locking/tilting bolt. The two-part receiver is machined from high grade steel, the barrel is free-floated and fitted with effective muzzle brake. Easily detachable buttstock is fitted with recoil-reducing buttpad, as well as with folding rear grip, which also serves as a rear support leg. Top of the receiver is equipped with full length Picatinny type rail which can accept any compatible scope mount.The Sthelios can be brought down to basic sub-assemblies within three minutes for maintenance or compact transportation or storage. Rifle is fed using single stack detachable box magazines, which hold five rounds of ammunition.
Price: $8900USD
Domestic Production Rights : $17.500.000.000
--------------------------------------------------------------
Asgarn 12.7x99mm Heavy Machine Gun
PRODUCTION VERSION : http://img372.imageshack.us/img372/3856/50bmgasganrha1.png
The Asgarn .50 BMG heavy machine gun is belt-fed, air-cooled machine weapon capable of semi-automatic and automatic fire. The Asgarn fires from a closed bolt at all times, and uses a short-recoil operated action with a vertically sliding locking block, which rises up to lock the bolt to the barrel extension, and drops down on recoil to unlock the bolt from the barrel. It also has a bolt accelerator, made in the form of a lever located at the bottom of the receiver. Upon recoil, once the barrel is unlocked from the bolt, it strikes the accelerator, so the kinetic energy of the recoiling barrel is quickly transmitted to the bolt, improving the reliability of the weapon.
It features a semi-direct gas-impingement system which by turning the gas plug from 1 to 6 increases and decreases the rate of fire of the machine gun by taking exiting gas from the barrel while firing and chanelling it to the bolt through reinforced gas tube,the gas plug system is also suitable (as seen on FN FAL´s) to increase reliability in extremely cold weather.
Barrels are screwed into the barrel extension and are not quick-detachable on standard Asgarn weapons; furthermore, once the barrel is installed in the weapon, the headspace must be adjusted prior to firing, or the weapon may fail to fire or produce a serious jam.The rear part of the barrel is enclosed in a short, tubular, barrel jacket with cooling slots,while the front part is fluted. The back of the receiver houses a heavily reinforced bolt buffer, and a special system of two additional buffers are used to soften the movement of the heavy barrel. On infantry guns, the cocking handle is installed on the right side of the weapon, but slots are made on both sides of the receiver for tank installations which may require a left-side cocking handle.
Asgarn machine guns use a disintegrating linked steel belt, with the feed switchable from one side to the other through the re-installation of certain parts in the feed unit. The belt feed is of the two stage type – every cartridge is first withdrawn from the belt toward the rear by the pivoting extractor lever, attached to the bolt. Once the cartridge is clear of the belt, it is lowered into a T-slot cut into the bolt face, and pushed forward into the barrel. Spent cartridge cases are forced down the T-slot and out of the weapon through an opening at the bottom of the receiver by the following cartridges, or by the pivoting belt extractor lever (for the last cartridge case). A rotary switch is used to select the track for left or right side feed.
Since the gun fires from a closed bolt, it has a separate firing pin, powered by its own spring, and hosted inside the bolt along with the sear and cocking lever. Upon the recoil stroke of the bolt, the cocking lever pulls the firing pin back until it is engaged by the sear. Once the bolt is fully in battery (locked closed), a pull on the trigger raises the trigger bar so it acts on the sear and releases the firing pin. The standard firing controls consist of a push-type thumb trigger and sear release buttons located between the dual spade grips. Alternatively, an electric solenoid trigger can be installed for mounted vehicle applications.
The Asgarn has an unusual method of providing semi-automatic fire – it has a bolt latch, which locks the bolt to the bolt buffer in the open position after each shot. Therefore, if gun is fired in semi-automatic mode (single shots), for each shot the operator must first release the bolt forward by pressing the bolt latch release, located next to the thumb trigger (as the gun fires from a closed bolt). After the bolt is released and the gun is loaded, the operator may push the trigger to fire a single bullet. If the automatic mode is desired, the bolt latch must be turned off and locked by turning its lock to the left. In this position it will not engage the bolt and the gun will fire continuously as long as the trigger is pressed. Asgarn heavy machine guns feature, among other items, an additional manual safety located next to the trigger.
Standard sights consist of a Hensoldt Optical Sight with 7.5x augmentation. Optionally,folding blade front and frame-type rear sights can be mounted. In this case the rear sight is mounted on the receiver, the front sight is located at the front of the receiver and protected by an arc-shaped sight protector. Additionally, various types of other telescopic and night sights can be installed using appropriate mountings.
Model Shown With A Fully Adjustable Precision Stock For Long-Range Interdiction.
Also Available With Spade Grips.
Variants:
-Anti-Aircraft Mounted Version
-Truck/Tank Mounted
-Tripod Mounted (On M3 Tripod)
-Helicopter/Transport Craft Deck Gun
General Specifications :
-Caliber: .50BMG (12,7x99mm)
-Weight:
Machinegun Only :29 Kg
Mounted On M3 Tripod :46 Kg
-Length: 1790 mm
-Length of barrel: 1280 mm
-Feeding Mechanism: Linked Belts
-Rate Of Fire: Gas-Plug Adjustable Rate Of Fire 450-650-950 Rounds Per Minute
Price: $2700 USD
Domestic Production Rights : $8.000.000.000USD
------------------------------------------------------------------------------------
M.A.C Defense SF-9/P
http://img114.imageshack.us/img114/739/pdwoi7.png
The SF-9/P is a new PDW development of M.A.C Defense.
The SF-9/P PDW follows the current trend for modularity of design, with intent of providing a compact personal defense weapon of about pistol size but of greater effectiveness for military personnel which is normally not issued with rifle of any kind.It has already been adopted by the Anghele Army,Navy,Air Force and Law Enforcement,and is in use with some Special Forces units abroad.
The SF-9/P is delayed blowback operated weapon that fires in single shots 2 or 3 rounds bursts and in fully automatic mode. It is made mostly from rust and heat resistant metal alloy and impact resistant polymers,with metal alloy upper receiver and a polymer lower receiver. Barrel and bolt can be replaced to change the caliber from standard Armor Piercing 9x19 +P+ to .40 S&W and .357 SIG Armor Piercing Rounds.The change will also require use of different magazines, which, in turn, may require replacement of the grip. The removable grip and the magazine body are made from polymer for easy check of remaining ammunition supply.
The SF-9/P features ambidextrous controls, including safety, fire mode selector, bolt catch release and magazine release. It is fitted with a telescopic buttstock. Sights are installed using integral Picatinny rail on the top of receiver, with standard being either open sights or red dot. Additional Picatinny rail is provided at the bottom of the gun housing, in front of the trigger guard.
Each unit comes with two magazines and cleaning kit.
The Gemtech sound suppressor shown is optional.
-Caliber : 9x19mm Luger / Parabellum, .40 S&W , .357 SIG
-Weight :1.4 Kg
-Length (Stock Closed/Open) : 350 / 500 mm
-Barrel Length :180 mm
-Rate Of Fire : 1100-1300 Rounds Per Minute
-Magazine Capacity : 30 Rounds
-Effective Range :100 Meters
Price : $ 410 USD
Domestic Production Rights : $210.000.000USD
-------------------------------------------------------------------------
M.A.C Military Ordnance .45 ACP Models:
-Fullsize | Suppressed (SD) Model
http://img514.imageshack.us/img514/365/standardos3.png
http://img49.imageshack.us/img49/1607/suoppresdfg3.png
Price: $370 USD [SD] Price: $490 USD
-Compact | Suppressed (SD) Model
http://img84.imageshack.us/img84/2552/mo45cqj8.png
http://img99.imageshack.us/img99/7812/mo45ra9.png
Price: $290 USD|[SD] Price: $ 340 USD
-Machine Pistol
http://img386.imageshack.us/img386/4318/machinepistolwb8.png
Price: $ 400 USD
-Compensated / Sport Open
http://img227.imageshack.us/img227/4131/mkivom9.png
Price: $ 590 USD
Domestic Production Rights (For All Variants) : $990.000.000USD
---
-Special Edition Colt Gold Model (With Presentation Case)
Serially Numbered Limited Edition Pistols
http://img201.imageshack.us/img201/5103/coltgoldmodelky7.png
Price: $5500 USD
----------------------------------------------------------------------------
(Sold Under License Of Universal Defense Storefront)
CAR-97
History:
The history of the CAR-97 is one born of war; it was created in the mists of Arenas’ civil war. This was the first weapon ever produced in country and it has more the proved its self in combat. During the war there were multiple problems found with the rifle, however these were eventually worked out and have left Areona with a safe reliable and dependable weapon that can be used in even the harshest of conditions.
Operation:
It uses the 7.62 NATO round because of the increased damage of the round; however it can be modified to shoot any other cartridge. Just like the AKM the gas operated action has a massive bolt carrier with a permanently attached long stroke gas piston. The bolt carrier rides on the two rails, machined in the receiver, with the significant clearances between the moving and stationary parts, which allows the gun to operate even when its interior is severely fouled with sand or mud. The receiver is stamped from sheet steel. The buttplate is made from plastic except the carbines that have a retractable metallic buttstock with rubber buttplate. It is often fitted with a 3x-magnification telescopic sight.
There are at current 3 versions of the rifle. All rifles also have a top, left and right rail system. The LMG version also has a built in bi-pod that can be removed.
Features of other weapons:
AK-47
• Recoil gas system
M-16
• Trigger grip and sights.
• Rear sights have a 2 position aperture adjustable for windage.
M1A1 carbine
• Retractable steel wire buttstock
HAC-7
• The charging handle is on the upper left side of the receiver, just high enough to be easily reached be either hand.
• The mag. release is directly behind the magazine a good deal in front of the trigger guard.
• The selector and bolt release are reversible with the use of the selector.
Variations
CAR-97A Rifle
-Barrel Length: 18.3 inches/ 464.82mm
-Caliber: 6.5x39mm
-Cyclic Rate: 700 rpm
-Length: 38.4 inches/ 975.4
-Magazine: 30 rounds or 50 rounds
-Muzzle Velocity: 3200fps
-Weight Unloaded: 7.5 pounds/ 3.4kg
-Effective Range: 500 plus meters
Price: $850 USD
CAR-97B Carbine
-Barrel Length: 10 inches/ 254mm
-Caliber: 6.5x39mm
-Cyclic Rate: 750 rpm
-Length: 32.4 inches/ 822.3 mm
-Length (folded stock): 25 inches/ 635mm
-Magazine: 30 rounds
-Muzzle Velocity: 3050fps
-Weight Unloaded: 6.4 pounds/ 2.9kg
-Effective Range: 300 meters
Price: $800 USD
CAR-97C LMG
-Barrel Length: 22.3 inches/ 566.42
-Caliber: 6.5x39mm
-Cyclic Rate: 675 rpm
-Length: 42.4 inches/ 1077mm
-Magazine: 100 rounds
-Muzzle Velocity: 3250fps
-Weight Unloaded: 8.8 pounds/ 3.9kg
-Effective Range: 650 meters
Price: $1000 USD
Designed by: Areona
----------------------------------------------------------------------------
(Sold Under License Of Nachmere)
SLR-2000 and SLC-2000:
http://i660.photobucket.com/albums/uu322/NWIpics_2009/NPSSLR-2000.png
SLR-2000 is a modern,high tech rifle made for tommorow battlefields.
Chambered in the 5.56X45 NATO cartridge, it is light, accurate and versatile. For users in need of more compact package, we offer the SLC-2000. Both weapons have integral rails and we offer a range of attachments to allow you maximum usage of this platform.
Specifications SLR-2000/SLC-2000:
-Caliber: 5.56X45mmNATO
-Operation: Gas piston, selective fire:single/two round bursts
-Weight: 2.7 kg/1.9 kg
-Length: 87cm/63cm
-Barrel Length: 34cm/24cm
-Rate of Fire: 630 rounds per minute
-Magazine Capacity: 30, 35, and 50 round box magazines
Price:
SLR-2000: 1000$
SLC-2000: 1150$
Domestic Production Rights (For both variants) : $1.000.000.000USD
----------
Accessories (only sold in packages):
-DMR Package(SLR only)-day and night scopes, DMR stock, bipod: +2900$
-40mm Package-granade launcher, sight: +1200$
-Commando : (Reflex+Laser sight, flashlight): +1500$
Sold separately:
-Reflex Sight: 300$
-Laser Sight: 200$
-Flashlight: 90$
----------------------------------------------
SLR and SLC Classic :
http://i660.photobucket.com/albums/uu322/NWIpics_2009/NPSSLR.png
The SLR is a 7.62X51 selective fire wooden furniture rifle. It has served as the standard issue rifle of the Nachmere military for the last 20 years. Recently, to accomodate the needs of our clients ,we reopened the production line for this classic rifle. For users in need of a compact package we offer the SLC, with a folding stock and foregrip.
The SLR is also avilable in single fire only, and with its wood furniture makes it a good rifle for police agencies that feel a "military" looking rifle is bad for PR.
Specifications SLR/SLC:
-Caliber: 7.62X51 NATO
-Operation: gas piston, selective or single-fire-only.
-Weight: 5kg/3.7kg
-Length: 90cm/68cm
-Barrel Length: 36cm/26cm
-Rate of fire: 550 rounds per minute
-Magazine capacity: 10, 15 and 20 round box magazines
Price:
-SLR(with detachable bipod and bayonet): 350$
-SLC(with bayonet) :450$
--------------------------------------------------------------
"Benchmark" 7.62X51NATO Sniper Weapon System
Detailed Image:
http://i660.photobucket.com/albums/uu322/NWIpics_2009/SWSBenchmark.png
The "Benchmark" is a High-Quality Military and Law Enforcement bolt action rifle.
The rifle is built under strict quality control, with the best materials and technology.The stock is completely adjustable to make every shooter feel like he is using a custom made gun.
It also comes with integral tactical rails, that allow you to attach just about any gadget you might be inclined to use.
Specifications:
-Caliber: 7.62X51mm Nato
-Operation: Bolt-Action
-Magazine: Internal, 5 rounds.
-Weight: 5.5 kg empty without scope
-Length: 1150 cm
-Barrel: 640 cm
-Effective Range: Up to 1000 meters, depending on ammo type.
Price:
-Standard version: 3200$
-Night Scope: +1700$
-Laser Sight: +300$
-Sound Suppressor: +280$
-Furniture Camo: No Extra Charge
Domestic Production Rights : $3.500.000.000USD
-----------------------------------------------------------
Shotguns:
-Remington 870
Caliber: 12-/16-/20-gauge
Price: $385 USD
-Franchi SPAS-12
Price: $718 USD
-Mossberg Model 500/590
Price: $296 USD[500]/$370 USD[590]
-Benelli M3 Super 90
Price: $861 USD
-Benelli M4 Super 90/M1014 JSCS
Price: $880 USD
-Benelli Nova Tactical
Price: $280 USD
-Franchi SPAS-15
Price: $650 USD
-AA-12
Price: $518 USD
------------------------------
Mortars Rocket Launchers & Other Explosive Ordnance:
M.A.C Defense Grenade Launchers:
M.A.C Heavy Industries | Defense Protecta GMG
http://img7.imageshack.us/img7/963/protecta.png
-Caliber: 40x53mm High Velocity
-Type: Blowback operated, belt fed automatic grenade launcher
-Overall length: 1230 mm
-Weight: 24.8 kg gun body plus 9.3 kg tripod and 7 kg softmount
-Effective range: up to 1500 meters against point targets, up to 2200 m maximum
-Rate of fire: 370 rounds per minute
The Protecta Grenade Machine Gun was initiated by the famous Anghele M.A.C | Defense company as a private venture in around 2007.The Army commenced trials of GPGMG in 1995, and by now it is in use by the Anghele Army, and is also offered for export.
The Protecta is an air cooled, belt fed, blowback operated grenade machine gun / launcher.
It fires from open bolt and uses advanced primer ignition to decrease the peak recoil. Feed is using NATO-standard disintegrating belts; feed unit can be easily set up to fed belt from either side of the weapon.
Cradle for standard ammunition boxes is attached to the mount; standard box holds 32 linked rounds and weights about 17 kg loaded.The Protecta can fire in single shots or bursts; fire mode is controlled by the safety / fire selector switch. Gun controls include spade grips at the rear of the receiver with the trigger between.
The Protecta can be attached to a special tripod or US M3 tripod through proprietary softmount, which also carries additional trigger and horizontal spade grips, shoulder rod and sight mountings,it is fitted (standard) with Hensoldt Optical Sights.
Price : $9100 USD
Domestic Production Rights: $8.500.000.000USD
----------------------------------------------------------
Grenade Launchers:
-AG36/C
Price: $905 USD
-HK 69
Price: $720USD
-HK 79
Price: $890USD
-AG36/C
Price: $1405 USD
-HK GMG/GMG Light (Grenade Machine Gun)
Price: $22,758 USD
-RPG-7
Price: $950 USD
-RPG-29
Price: $2,482 USD
-GP-25 and GP-30
Price: $890 USD
-Shoulder-Launched Multipurpose Assault Weapon (SMAW) | Mark 153 SMAW
Price: $13,000 USD
-AGS-30
Price: $18,500 USD
-Bofors AT4/ M136
Price: $31,482 USD
-K.A.C (Knights Armament Corporation)M203
Price: $1605 USD
-Mk.19 AGL
Price: $15,758 USD
-Mk.47 AGL
Price: $17,000 USD
-M72 LAW
Price: $5890 USD
-Panzerfaust 3 (Pzf 3)
Price: $2,482 USD
http://www.wfyi.org/fireandice/images/arms/fi_f_ar_mortar.jpg
-51 mm Light Mortar
Price: $3,370 USD
-M224 60 mm
Price: $10,658 USD
-M252 81 mm and L16A2 81 mm
Price: $24,717 USD[M252]/ $24,445 USD[L16A2]
-M120 Mortar
Price: $46,660 USD
http://www.army-technology.com/contractor_images/armtec/mortar_propellant_3.jpg
-30 & 40mm Grenades:
Price: $8250 USD for a box of 50 Grenades
http://www.army-technology.com/contractor_images/dezamet/2-44mm_grenades.jpg
-Hand Grenades:
Price: $675 USD for a box of 50 Grenades
http://grenadelauncher.com/US-hand-grenades.jpg
-Mortar Cartridges:
Price: $1600 USD for a box of 50 Cartridges
http://www.dismalworld.com/im/violence/landmines-in-sudan-2.jpg
-Landmines:
Price: $65 USD per Anti-personnel mine or $120 USD per Anti-vehicle mine
http://www.jergym.hiedu.cz/~canovm/vybusnin/PXD/IMAGES/semtex.jpg
-C-4 Explosive:
Price: $4600 USD per 500 kg
-C-3 Explosive:
Price: $3330 USD per 500 KG
-Semtex Explosive:
Price: $6200 USD per 500 kg
-Claymore:
Price: $320USD per unit
-T.N.T
Price: $15 USD per unit (in stick)
-Tannerite (For Exploding Targets)
Price: $5 per 2l Bottle
Law Enforcement & Military Ammunition :
http://www.military.co.il/asg/ammunition_a.jpg
-Pistol Cartridges: (Please Specify Caliber When Ordering)
Price: $65 USD for box of 100 Cartridges
-Rifle Cartridges: (Please Specify Caliber When Ordering)
Price: $85 USD for a box of 100 Cartridges
-Shotgun Cartridges: (Please Specify Caliber When Ordering)
Price: $75 USD for box of 100 Cartridges
-----------------------------------------
We wish to invite you to visit our storefront so you can browse our entire catalogue:
http://forums.jolt.co.uk/showthread.php?t=570831
Thank you,
M.A.C Heavy Industries Defense Management.