NationStates Jolt Archive

HAS DEVLOPED XMA-33 “VIPER’’ ASSAULT RIFLE To correct the problem with the XMA Viper


AMMO 5.56x45mm full metal jacket enhanced penetrator
Damage High
Action :gas operated, rotating bolt
Range 800 meters for an area target / 550 meters for a point target
Rate of fire 800 rounds per minute
Magazine 20 or 30-shot magazine
Accuracy: high
Scope Advanced combat optic,1.5x zoom
Primary function: Infantry weapon
Manufacturer: Replica Manufacturing and Fabrique National Manufacturing Inc.
Maximum effective range:550 meters
Muzzle velocity: 975 m/s
Weight, empty / loaded w. 30 rounds 3.77 kg / 4.47 kg
Overall length: 1006 mm
Barrel length: 508mm


A lightweight, air-cooled, gas-operated, magazine-fed rifle designed for either automatic or semi-automatic fire through use of a selector lever Accuracy is enhanced by incorporating an improved muzzle compensator, three-round burst control, and a heavier barrel; ahh no one

UEMG HAS ORDER A REPLACEMENT FOR THE M-41A Pulse Rifle FOR THE United Earth Military Marines

HAS DEVLOPED THE Beretta AR-70/223

AMMO 5.56x45mm full metal jacket enhanced penetrator
Length 995 mm
Barrel length 450 mm
Weight, empty 3.8 kg
Magazine capacity 30 rounds
Rate of fire 650 rounds per minute
Effective range 400 meters
Scope Advanced combat optic,1.5x zoom
Manufacturer: Replica Manufacturing and Febrifuge National Manufacturing Inc.

The gas operated action of the AR-70/223 is fairy conventional, with the long stroke gas piston, located above the barrel. The gas piston rod is linked to the bolt carrier by using a cocking handle as a lock, and the return spring is located around the gas piston, above the barrel. The gas block featured a two positions gas regulator (for normal and adverse conditions), and the gas cutoff, integral with raising grenade sight. When grenade sight is raised into the firing position, it automatically closes the gas port. The barrel is fixed to the receiver using the threaded barrel nut, allowing for quick barrel replacement (for repair purposes only, not in the field), without the extensive headspace adjustments. The barrel bore is chrome-plat The feeding of the AR-70/223 Rifle is achieved by using STANAG ) compliant magazines, with the ambidextrous magazine release button located at the both sides of the magazine housing in the lower receiver. , feeding is done from the proprietary 30 rounds magazines, with the magazine release lever located between the magazine and the trigger guard. the AR-70/223 series rifles featured a bolt stop device, which holds the bolt open when the last round from the magazine is fired. The bolt release button is located at the left side of the receiver, above the magazine housing.
The sights of the AR-70/223 rifles consists of the hooded front blade, mounted on the top of the gas block, and the flip-up aperture rear, marked for 250 and 400 meters range. The top surface of the receiver is fitted with combat optic,1.5x zoom/ accessory rail. A detachable carrying handle with the see-through base is available for all AR-70/90 series rifles. The AR-70/223 also can be equipped with Zeus "Orion" night-vision sight or the Aim point 4X telescope sight (any other sights with compatible mountings also can be easily installed, if required).