NationStates Jolt Archive

DAC-91 Submachine Gun

http://img.photobucket.com/albums/v383/Doomingsland/DAC-91A1holosight1.png

DAC-91K PDW (shown with stock retracted)

http://img.photobucket.com/albums/v383/Doomingsland/DAC-91full1.png

DAC-91A1 SMG

http://img.photobucket.com/albums/v383/Doomingsland/DAC-91A1holosight1SD.png

DAC-91SDK (suppressed, stock retracted)

http://img.photobucket.com/albums/v383/Doomingsland/DAC-91SD.png

DAC-91SD1 (suppressed)


The DAC-91A1 (Doomingsland Automatic, Compact-Model 91, version one) is a result of decades of research into the field of firearms. It is the first standard issue Imperial weapon to use conventional caseless rounds. Constructed using lightweight polymers, the DAC-91 was designed with compactness in mind, and as a result, utilizes a number of measures to allow for this. It comes in a bullpup configuration, meaning the magazine feed is behind the trigger itself. To further save room and allow for larger size magazines, the weapon utilizes caseless 4.8x33mm ammunition and cylindrical, helical magazines.

Made mostly of plastics, this magazine contains a helical guide grooves at its "inner" cylindrical wall, with the rotating central "follower", that causes the cartridges to follow the helical track inside the cylinder. The follower is operated by the spiral spring, located at the rear of the cylinder. Magazine is equipped with winding handle, so it can be stored loaded and with unwound spring, to avoid loss of spring tension during the storage time. When required, magazine spring could be quickly wound up by rotating the handle to prepare magazine for fire. The weapon is generally issued with a 75 round magazine in the A1 version and a smaller 50 round magazine for the K version.

The 4.8x33mm ammunition goes the way of the 5.7x28mm bullet, striving for velocity over size. The pointed 4.8mm bullet is quite capable of piercing most body armor with superb accuracy, yet has nearly non existant recoil. This deadly combination makes for an extremely potent weapon.

The system is fired electronically. When the trigger is pulled (and the system is locked into 'Primary Only'), the trigger causes two conduits to touch, completing a circuit which leads to an electrical charge which contacts the shell's primer and fires, igniting the powder and so forth.

The weapon is generally issued in two variants: the full sized variant (DAC-91A1), and the machine-pistol variant (DAC-91K PDW [personal defense weapon]). The DAC-91K is small enough to be used as a sidearm, being just fifteen inches long. This weapon is in service in the Imperial military as a sidearm for aircraft crew and infantry, and also serves in the Imperial Diplomatic Protection Service and Inquisition thanks to its compactness. It features an extendable, telescoping stock, allowing for increased accuracy.

The DAC-91A1 is a bit larger at just over 20 inches long. This allows for far more managable recoil and superb accuracy. This weapon is generally issued to vehicle crews (such as tank crew or helicopter crew)

The weapon is issued with an advanced holographic sight, which projects the crosshair into a small sheet of glass, making it look as if the shooter aimed using a tiny TV screen. Five different crosshairs are available, and are selectable by turning a small wheel mounted to the sight system. Coupled into the holo sight dot sight is the 'Information Display Sytem-Submachine Gun', which is a small projection system which displays data gathered from sensors inside the weapon. A laser rangefinder is included in the weapon (beneath the barrel) and uses a laser frequency on the invisible spectrum, however, it can be viewed through the red-dot sight. This allows the soldier to view range to the target with the weapon and it automatically feeds that data into a computer located inside the weapon which then adjusts the red dot (or other cross-hair type) to where the soldier should aim to hit the target at the range tested. The IDS-SMG also displays the amount of ammunition used or left.

The weapon includes an advanced rail system, as well, allowing for the mounting of a LED flashlight, laser spot projector, and other similar accessories. The barrel accomodates for the mounting of a sound suppressor or a flash suppressor.

Specifications:

Caliber: 4.8x33mm Caseless
Weight: 1.2 kg empty, 2.1 loaded (DAC-91K) 2 kg empty; 2.5 kg loaded (DAC-91A1)
Lenght: 13.2 inches (stock retracted) 17.9 inches (stock extended) (DAC-91K) 19 inches (DAC-91A1)
Barrel length: 8 inches (DAC-91K) 12 inches (DAC-91A1)
Rate of fire: 900 rounds per minute
Magazine capacity: 75 rounds (DAC-91A1) 50 rounds (DAC-91K)
Effective range: 220 meters (DAC-91K), 280 meters (DAC-91A1)
Fire modes: Single, Burst, Auto

Cost Per Unit: $800 (DAC-91K), $950 (DAC-91A1)

OOC:Pics made by MassPwnage and extensively modified by me.

The Iron Concordiat of Wirraway will order 50,000 of these SMGs for immediate use with the Marines. We have been searching some time for a suitable SMG and this one fits the bill, plus we get to subsidize the economy of CAD.

-------------------MONEY WIRED ON CONFIRMATION-----------------------

OOC: Doom, can you tg me the password for CAD, I'd like to get back in.

Order confirmed. As Wirraway is a prefered customer here at DDI, your discount brings the total price to 20 million USD. Thank you, come again.

OOC:Pass will be sent ASAP.

OOC: looks kool Doom

IC: The federation might have some interest in this weapon

we'll take 2000

Confirmed.

OOC: Nice work Doom. I'd buy some if we weren't IC enemies. And it's a shame what happened in that RP with Jarridia.

I'd buy some, but then the little pride I have left would be destroyed. Besides, looks like some strange P-90/G-11 hybrid. At least it's original. Good job.

OOC: Nice work Doom. I'd buy some if we weren't IC enemies. And it's a shame what happened in that RP with Jarridia.
OOC:Thanks! Yeah, I'm kinda pissed about that. BTW, I'll try to post in Inkana ASAP (actualy, this SMG was already in service then)

I'd buy some, but then the little pride I have left would be destroyed. Besides, looks like some strange P-90/G-11 hybrid. At least it's original. Good job.
OOC:Thanks! That means alot coming from you (being my former primary rival in small arms production and all)

Looks great. On problem I would say would be: "This same system gathers meteorological data such as humidity, wind-speed, and other environmental factors to compute into this as well, however, this system can be disengaged as its sometimes misleading (such as when inside a bunker, etc.)."

This would be extreamly hard to fit into a gun, and would be very prone to breaking down. Just one example of how it would not be possible is how does it detect windspeed?

Whoops, that was left over from a different gun. Lemme edit that. Thanks for pointing that out.

ooc: It's supposed to be styled after the MP7. I guess it would look like a G11, because the MP7 looks like a G11.

OOC:Thanks! That means alot coming from you (being my former primary rival in small arms production and all)

Former? Heh... you'll see something new soon.

Former? Heh... you'll see something new soon.
OOC:I suppose I may have to ready my rifle for export...

Bumb

The United Federation of TBA will purchace 2000 of these fine weapons

OOC: Nice work Doom. I'd buy some if we weren't IC enemies. And it's a shame what happened in that RP with Jarridia.
OOC:Actualy, I bet the RSTF would have a field day with these...

The United Federation of TBA will purchace 2000 of these fine weapons
Confirmed. Due to your status as an ally, you'll recieve a 25% discount.

[OOC: Nice work, I just have one question, how would this weapon fare as a secondary weapon, say strapped on the lower half of the leg?]

[OOC: Nice work, I just have one question, how would this weapon fare as a secondary weapon, say strapped on the lower half of the leg?]
OOC:The DAC-91K is designed to be used as a secondary weapon or sidearm (and as a concealed weapon), so it would work pefectly.

Confirmed. Due to your status as an ally, you'll recieve a 25% discount.Money being wired as we speak. Nice doing buisness with one of our Great allies

OOC: Basically, this is the MP7 as it was conceived... somewhat of a stepped up G11PDW?

G11PDW Prototype Link (http://images.google.com/imgres?imgurl=http://www.hkpro.com/image/g11pdw1.jpg&imgrefurl=http://www.hkpro.com/g11pdw.htm&h=276&w=489&sz=24&tbnid=Ai3pL-Uyh2cJ:&tbnh=71&tbnw=127&hl=en&start=2&prev=/images%3Fq%3DG11%2BPDW%26svnum%3D10%26hl%3Den%26hs%3D8ZK%26lr%3D%26client%3Dfirefox-a%26rls%3Dorg.mozilla:en-US:official%26sa%3DN)

MP7 In Real Life (http://users.belgacom.net/jm.armes/Hkmp7-te/mp7-te1.jpg)

IRL, the MP7 evolved from the PDW, and became a cased weapon (still in 4.8), after the failure of the G11 project to find a home. (The Bundeswehr [sp] cancelled orders, and the ACR Project was just a tech Demo.) If your round maintains the MP7 ballistics, that will blow through 1.8mm of titanium plus 20 layers of ballistics kevlar at 200 yards, allowing for a full powered load.

[Suppression will reduce the effectiveness due to velocity loss for sound reduction.]

All in all, nice work on this, Doom; it's good to see some appreciation for caseless around here. If you wish to complete the G11 project, don't forget the LSW! (Three hundred rounds of caseless joy!) G11 LSW (http://www.wapahani.com/imageA2D.JPG)

Oh, and sorry, but I have to showcase this little baby. Taking the concept to the next level. (http://ns.goobergunch.net/wiki/index.php/SAG_N.01_Needler) It's one of my "what if" guns.

OOC: Basically, this is the MP7 as it was conceived... somewhat of a stepped up G11PDW?

G11PDW Prototype Link (http://images.google.com/imgres?imgurl=http://www.hkpro.com/image/g11pdw1.jpg&imgrefurl=http://www.hkpro.com/g11pdw.htm&h=276&w=489&sz=24&tbnid=Ai3pL-Uyh2cJ:&tbnh=71&tbnw=127&hl=en&start=2&prev=/images%3Fq%3DG11%2BPDW%26svnum%3D10%26hl%3Den%26hs%3D8ZK%26lr%3D%26client%3Dfirefox-a%26rls%3Dorg.mozilla:en-US:official%26sa%3DN)

MP7 In Real Life (http://users.belgacom.net/jm.armes/Hkmp7-te/mp7-te1.jpg)

IRL, the MP7 evolved from the PDW, and became a cased weapon (still in 4.8), after the failure of the G11 project to find a home. (The Bundeswehr [sp] cancelled orders, and the ACR Project was just a tech Demo.) If your round maintains the MP7 ballistics, that will blow through 1.8mm of titanium plus 20 layers of ballistics kevlar at 200 yards, allowing for a full powered load.

[Suppression will reduce the effectiveness due to velocity loss for sound reduction.]

All in all, nice work on this, Doom; it's good to see some appreciation for caseless around here. If you wish to complete the G11 project, don't forget the LSW! (Three hundred rounds of caseless joy!) G11 LSW (http://www.wapahani.com/imageA2D.JPG)

Oh, and sorry, but I have to showcase this little baby. Taking the concept to the next level. (http://ns.goobergunch.net/wiki/index.php/SAG_N.01_Needler) It's one of my "what if" guns.
OOC:Thanks for the complements :)

As a matter of fact, I'm currently fielding a caseless assault rifle (the DR-31A1, chambered for a 6.7mm caseless round). If your interested, I can TG you details (although I'll probably publicly post the specs sometime this month).

Actualy, I designed this with no knowledge of the G-11 PDW and minimal knoweldge of the MP-7's development.

Sweet, yeah, hit me. I'm a bit of a gun nut, and all the guns of the ACR Project are my babies.

That's even cooler, that you didn't know about the PDW-MP7 connection. If you're interested in experimental firearms, check out the whole ACR Project. You know what, I'm going to make a thread about that, to fill people in.

http://forums.jolt.co.uk/showthread.php?t=439624

There you go. All about the ACR Project.

OOC:The DAC-91K is designed to be used as a secondary weapon or sidearm (and as a concealed weapon), so it would work pefectly.

[OOC: Well its a SMG, and that would make an awesome secondary weapon in my paratroop divisions, as long as they dont lose it in the jump.]

I would like to place an order for 9000 of these new SMGs. Money is wired upon conformation. [Crappy IC post but whatever, it gets business for you.]

[OOC: Well its a SMG, and that would make an awesome secondary weapon in my paratroop divisions, as long as they dont lose it in the jump.]

I would like to place an order for 9000 of these new SMGs. Money is wired upon conformation. [Crappy IC post but whatever, it gets business for you.]
Confirmed. Enjoy.

OOC: Nice thing Doom!

IC:
Statement

"Forget the usual boring talk how great it is, money says more than boring statements. We would like to buy one hundred thousand. Whatever the amount is, it's wired upon confirmation."

- Someone who wants a lot of guns.

Confirmed.

We would like to place an order for 100,000 DAC-91A1s and 150000 DAC-91Ks please, These will do nicely for equiping our foreign legion and providing sidearms for the marines.
If they do well expect further orders.

Confirmed. As this is quite a large order, you shall recieve a 10% bulk order discount. Thank you, come again.

We will buy 300,000 DAC-9A1s and 300,000 DAC-91Ks for the total cost of 525,000,000 USD. Money will be wired upon confirmation.

-Tomzillian Royal Military

Order confirmed. We hope the weapons serve you well.

bump

Doomingsland,

As you may or may not be aware, Obsideon Genetics Corporation is currently in need for a Nation to design and manufacture six types of small arms (full story here (http://forums.jolt.co.uk/showthread.php?t=439722)) as vell as twelve types of vehicle. This is a request for you to consider producing these small arms for 25% of proffit gained by the business venture. If, of course, you wish to produce the vehicles as well; 75% of all income would be yours. We strongly urge you to consider this contract.

Dr. John H. Narron
CEO of Obsideon Genetics Corporation

Doomingsland,

As you may or may not be aware, Obsideon Genetics Corporation is currently in need for a Nation to design and manufacture six types of small arms (full story here (http://forums.jolt.co.uk/showthread.php?t=439722)) as vell as twelve types of vehicle. This is a request for you to consider producing these small arms for 25% of proffit gained by the business venture. If, of course, you wish to produce the vehicles as well; 75% of all income would be yours. We strongly urge you to consider this contract.

Dr. John H. Narron
CEO of Obsideon Genetics Corporation
Official Corporate Response

I have personaly reviewed your requests for weapons and have decided to commision the design of a number of required small arms for use in your military. In addition to this, the design of a main battle tank is also under consideration. We thank you for your patronage,

-General Marcus Caius Laveanius, CEO of Doomingsland Defense Industries

OOC:According to that thread, your post modern, correct? If so, I have a number of weapons I can design for you (this SMG is pure mod tech)

bump

bump

OOC: Hey Doom you want the Federation to Advertise your store for you in the thread?

OOC: Hey Doom you want the Federation to Advertise your store for you in the thread?
OOC:Sure, that'd be great.

Doom, I'm still waiting on the pic, but I'm developing another SMG of my own and it will be a competetor with this. Sound good? It is going to be similar to my first SMG/PDW. This was my first SMG:

Type: Personal Defense Weapon
Name: RSR-181 Scorpion
Fire Modes: Semi-Automatic, Full Automatic.
Calibre: 4.6 x 30mm/.181 Caliber
Special: Caseless, Blended-Metal
Barrel Length: 259mm (9.68")
Overall Length:
- Stock Closed: 300 mm (11.81")
- Stock Open: 540 mm (22.25")
Magazine Capacity: 25, 45
ROF:
-Full-Auto: 900 rounds/min
Muzzle Velocity: 743 m/s (2,378 ft/s)
Maximum Effective Range: 250 m (820 ft)
Mass w/o Magazine: 1.20 kg (2.64 lbs)
Mass w/ 25 round Magazine: 1.37 kg (3.01 lbs)
Mass w/ 45 round Magazine: 1.54 kg (3.39 lbs)

I'll take 200,000 :sniper:

the republic of soviet vladamitch would like to purchace 10.000 weapon units

OOC:Sure, that'd be great.OOC: done

Doom, I'm still waiting on the pic, but I'm developing another SMG of my own and it will be a competetor with this. Sound good? It is going to be similar to my first SMG/PDW. This was my first SMG:

Type: Personal Defense Weapon
Name: RSR-181 Scorpion
Fire Modes: Semi-Automatic, Full Automatic.
Calibre: 4.6 x 30mm/.181 Caliber
Special: Caseless, Blended-Metal
Barrel Length: 259mm (9.68")
Overall Length:
- Stock Closed: 300 mm (11.81")
- Stock Open: 540 mm (22.25")
Magazine Capacity: 25, 45
ROF:
-Full-Auto: 900 rounds/min
Muzzle Velocity: 743 m/s (2,378 ft/s)
Maximum Effective Range: 250 m (820 ft)
Mass w/o Magazine: 1.20 kg (2.64 lbs)
Mass w/ 25 round Magazine: 1.37 kg (3.01 lbs)
Mass w/ 45 round Magazine: 1.54 kg (3.39 lbs)
OOC:Yup, sounds good.

IC:

Orders confirmed.

bumpz0rz

OOC: I might as well...

IC: I'll have 50,000 of them.

Confirmed, 25% discount added due to your status as an ally.

bump, damnit!!!

bump

Doom, I think you have to let the thread die now.

Doom, I think you have to let the thread die now.
TIOR, I think I have to keep the thread alive now.

May i have 5000 DAC-91A1s

Yes, you may. Order confirmed.

[OOC: Very nice. You know me - I like to nitpick about tech - but I cant see anything wrong with this. If we werent such enemies I would buy some. Then again I could find some way to nick them and make cheap copies <.< >.>]

[OOC: Very nice. You know me - I like to nitpick about tech - but I cant see anything wrong with this. If we werent such enemies I would buy some. Then again I could find some way to nick them and make cheap copies <.< >.>]
OOC:Thanks. I'll probably dump a big shipment on Sarzonian terrorists so they can continue to wreak havoc, so you could probably get some off dead ones.

Official Corporate Response

I have personaly reviewed your requests for weapons and have decided to commision the design of a number of required small arms for use in your military. In addition to this, the design of a main battle tank is also under consideration. We thank you for your patronage,

-General Marcus Caius Laveanius, CEO of Doomingsland Defense Industries

OOC:According to that thread, your post modern, correct? If so, I have a number of weapons I can design for you (this SMG is pure mod tech)


ooc: I just might have have found someone willing to look at small arms, but i would rather someone as experienced as yourself to take the contract. Just for the Doomingsland seal of approval i am offering all unclaimed proffits that the 4.16% thing leaves. Taking all available contracts would leave you with 75% of the take, quite a sum as i am sure thatt many younger nations would jump at the chance to get a 'Just Add Water' military. If you know anyone that would be interested, in this or in creating a similar service for airforce or navy, let me know.

http://img307.imageshack.us/img307/6930/ceap4as.gif
This storefront is approved by the TBA Alliance Ministry of Trade.

TBA, could you please take a look at the storefront in my profile? I think it woudl be up to your standards.

last bump tonight

OOC: Doomingsland, i need to know which weapons/vehicles for my clone project you will be producing so i can let someone else know whats what.

OOC: Doomingsland, i need to know which weapons/vehicles for my clone project you will be producing so i can let someone else know whats what.
OOC:I can probably do the small arms, and might possibly do some vehicles (if I have time).

bump

The "People's Republic of Muzchkistan" is very interested .we are looking for a new SMG but we don’t want it in the calibre 5.7x28mm beacuse our standard SMG ammunition is 7,62x25 mm to our old PPS-43 and we still have hundreds off tonnes off that ammunition in army storage. And we would like to have the licence to produce the weapon here in Muzchkistan.

The "People's Republic of Muzchkistan" is very interested .we are looking for a new SMG but we don’t want it in the calibre 5.7x28mm beacuse our standard SMG ammunition is 7,62x25 mm to our old PPS-43 and we still have hundreds off tonnes off that ammunition in army storage. And we would like to have the licence to produce the weapon here in Muzchkistan.
The DAC-91 family of weapons is not in the 5.7x28mm caliber of ammuntion. It is, in fact, chambered for 4.8x33mm. We could send you designs for the same weapon chambered in 7.62x25mm as requested, however, the weapon's performance would be drastically lower than the original model.

Said production rights will cost 500 million.

The DAC-91 family of weapons is not in the 5.7x28mm caliber of ammuntion. It is, in fact, chambered for 4.8x33mm. We could send you designs for the same weapon chambered in 7.62x25mm as requested, however, the weapon's performance would be drastically lower than the original model.

Said production rights will cost 500 million.

The performance are not to important in this case it gone be a self-protection weapon for armoured crew and the PPS-43 have done the job well for 50 years but it is time to replace it. so we would like to buy a test series (100 piece) 50 chambered in 4.8x33mm and 50 chambered in 7.62x25mm so we can see what calibre works best for us.

we are also looking for a new light machine gun to replace the Degtyarev RPD .But we want it to be chambered in 7,62x39 mm so we can use the same ammunition that we use in the standard assault rifle AK-47 and AKM.
Looking forward to doing business with you

The performance are not to important in this case it gone be a self-protection weapon for armoured crew and the PPS-43 have done the job well for 50 years but it is time to replace it. so we would like to buy a test series (100 piece) 50 chambered in 4.8x33mm and 50 chambered in 7.62x25mm so we can see what calibre works best for us.

we are also looking for a new light machine gun to replace the Degtyarev RPD .But we want it to be chambered in 7,62x39 mm so we can use the same ammunition that we use in the standard assault rifle AK-47 and AKM.
Looking forward to doing business with you
Very well. The weapons are being shipped immediatly as ordered. We will also look into designing a new light machinegun for your armed forces. We look forward to providing arms to your military.

bump

OOC:I can probably do the small arms, and might possibly do some vehicles (if I have time).


Thanks a heap. images are not vital, but if you dont want to do them then i'll give it a go.

We at Cobra Global arming a very small force for special missions, we'll take 150 of your DAC-91 Submachine Guns

Order confirmed.

OOC:I probably won't have time for pics (school starts next week)

bump

bump

ooc: Alright, you have the Small arms section to yourself and Mondoth is willing to cover 10 of 12 vehicles. If you do do vehicles, they will have to be the Main Battle Tank and the Heavy Battle Tank.

ooc: Alright, you have the Small arms section to yourself and Mondoth is willing to cover 10 of 12 vehicles. If you do do vehicles, they will have to be the Main Battle Tank and the Heavy Battle Tank.
OOC:Good, I happen to specialize in MBTs. However, having both an MBT and an HBT is kinda pointless...

up

OOC:Thanks. I'll probably dump a big shipment on Sarzonian terrorists so they can continue to wreak havoc, so you could probably get some off dead ones.OOC: That'd be pretty useful for Sarzonia's army, too. I was about to start work on a SMG, but then for the sake of getting something on my storefront quickly, I bought out Pacitalia's small arms store. What's lacking there is specific information about all but his mini-SMG, but at least I have a basis for getting started.

Sorry for the ramble, but I think that's a great idea (plucking some of these off dead terrorists).

OOC:Shall we take this to TG, then?

OOC:Shall we take this to TG, then?Sure.

up

OOC: Doom, check TGs.

bump

Mondoth Arms would like to acquire rights to produce this weapon in our native 4.7mm caseless cartridge and compatible with our LEGION Infantry suite. How much would this cost?

To: Doomingsland Armament Export Authorities

The Golden Throne's Werhmacht has issued a plea to the Emperor for the purchase of a total of six million pieces of your DAC-91A1 design, understanding that it is the largest piece in the collection. We are currently undergoing a serious restocking of infantry weapons, and we've decided that our Hali-21 is more than enough for a standard assault rifle, and our own personal pistol is enough as a sidearm. However, we need a weapon for urban combat routines, and other combat procedures, and it's been decided that the DAC-91A1 is the SMG that best fits the roles we would like to use them in.

The six million pieces should be delivered, although we have no idea of your production abilities, within a year or two. Preferrably, we would like to see batches of two hundred thousand a month. If this is not possible then deliver how you see fit. Nonetheless, if you were able to deliver under that velocity we would be very appreciative of the weapon.

As for a port city where your convoys can deliver the supplies to, Targul Frumos is best suited to take the importation. Targul Frumos can be found in the southern protion of the Empire, east of Haven.

We thank you for your design and for your business, and hope that our order was not too pushing. This is our first order of foreign goods in the history of the Empire. Regardless, we truly believe that for a first order, it is perhaps one of the best importations of foreign armaments that we could have done.

[signed]Fedor I

Official Corporate Response

Greetings,

It is truely an honor to serve Your Excelency's armed forces by providing such a large order of our fine weapons. As the Empire of the Golden Throne is one of three member nations (Doomingsland included) in the Holy Triumvirate, Doomingsland Defense Industries is proud to serve your order with a 40% discount. As requested, a total of 200,000 units shall be delivered to the specified port monthly.

In addition to this, plans for the production of 4.8x33mm caseless ammunition shall be forwarded to the appropriate authorities within your nation to allow for easy resupply. The total cost for all of this shall come to 32.4 billion USD.

Deliveries shall commence immediatly. We hope you find these weapons satisfactory.

Response to Mondoth

Cost for such an aquisition would be 500 million USD. However, these production rights do not allow for you to sell these weapons without the explicit written persmission of the nessessary DDI authorities.

Money is wired for the production rights. We wish to also acquire the ability to sell or otherwise provide limited numbers of these weapons to other nations as part of a counter terrorism cooperation. (I want them for my counter terrorist operatives and as I sometimes provide training and equipment to the counterterrorist operatives of other nations it would be good to be able to provide them with the same weapon their trainers use. but either way I'll be using it as my counter terr' SMG)

Money is wired for the production rights. We wish to also acquire the ability to sell or otherwise provide limited numbers of these weapons to other nations as part of a counter terrorism cooperation. (I want them for my counter terrorist operatives and as I sometimes provide training and equipment to the counterterrorist operatives of other nations it would be good to be able to provide them with the same weapon their trainers use. but either way I'll be using it as my counter terr' SMG)
This would be an unacceptable arangement, as we would see this as denying profit to DDI. However, if you were to pay a 80% royalty per sale or donation, we could, perhaps, come to an agreement on your ability to distribute said weapon...

OOC:In other words, if you pay me a certain amount of money for every gun you sell, you can do the whole distribution thing with the counter-terrorists.

This would be acceptable, we wish only to be capable of smoothing out pssible cross training problems by standardizing weapons with the nations we train, not to make a profit.
OOC: Sounds good.

Then we shall agree to this arangement.

Comminque to Doomingsland:

Greetings from the Sharina Technocracy.

We are interested in purchasing several hundred of each variant of your SMG's for trial purposes. We are willing to bestow $10 million towards the order, as we believe in generous payments for promising new weapons and technologies.

I look forward to doing business with you.

Live well,
~President Rand Veristek

Official Corporate Response

Greetings,

Five hundred units shall be shipped immediatly for your testing pleasure. We hope the weapons suite your needs. Thank you, come again.

Official Imperial Communique-

The Empire would be most interested in purchasing production rights for both weapons as well as an initial shipment of:

100,000 DAC-91A1 Sub-machine guns
-$95,000,000
400,000 CAD-91K PDW Machine Pistols
-$320,000,000

The funds in question shall be transferred upon confirmation of the order along with the necessary funds for the purchase of production rights for both weapons.

Order confirmed. As you are a close ally, production rights will cost a mere 20 million.

Order confirmed. As you are a close ally, production rights will cost a mere 20 million.

Consider it done.

We would be interested in purchasing production rights to both the weapons as well as an initial supply of 100,000 of each. Money shall be wired upon confirmation.

The Army of the Divided Territories of Zanziik wish to purchase 12,259,500 of the DAC-91K versions of your weapon, coming to a total purchase of $9,807,600,000. Money will be wired on confirmation.