NationStates Jolt Archive

http://www.bateshome.com/jordan/adamworks.jpg

AdamWorks is Raysia's High-Tech Development team. Here, all the new fighters are born. AdamWorks has a reputation of being able to design, prototype, test, and hand off to the manufacturers, any project, in under a year. This comes from the high ammounts of training, and the readily available resources, and unlimited budget.

This thread will contain the Current Projects of RMT's R&D Sector, AdamWorks

http://www.bateshome.com/jordan/rsig1.jpg (http://www.bateshome.com/jordan/rmtdex.htm)

AdamWorks' latest Aerospace project, as Presented by Dr. John Amulek:

Dr. Amulek smiles as he pops open a fancy briefcase. Inside the briefcase is actually a plasma screen monitor and a PDA computer.

He turns the screen on, and immediately a short repeating demo video begins playing from the PDA. Some techno music begins playing quietly as Amulek adjusts the screen to show the other delegates.

"For the longest time, Raysia has depended on Unmanned Combat Aerial Vehicles (UCAVs) for it's defense forces and massive strike forces. These planes provide air superiority that is cheap, effective, and does not cost lives. But, if you've been following us, we've been using the same UCAVs for the last decade.

"Well, that's all about to change, because we are currently in the final development stages of our new UCAV, the RF-27!"

http://www.bateshome.com/jordan/gucav.jpg

"As you can guess, this has the standard features of any Raysian UCAV... Thrust vectoring engine, Brother telemetry systems, Multi-Function Camera with IR and Motion Tracking, Next level AI, et cetera et cetera... What's so special about this little guy?"

"With technologies in Aerospace evolving quickly, we have developed this frame to be far more economical than the RF-12. It is light, yet finds room to house 4 .50-Calibur cannons with just under 200 rounds of ammunition, and even still have the lift capacity to carry 6000 lbs of payload.

"The truely remarkable feature of this quick attack craft is it's ability to perform rough landings and take-offs. It's frame is sturdy and light enough, it's gear is strong enough, and it's engines are poweful enough, to deploy this craft into the air from a dirt road!

"The RF-12, when produced, will be the ultimate tool for any resistance force or secret outpost. This unmanned marvel can land and take-off in any place a Piston-Engine 20th century plane could!

"We are working on a manned plane with the same ability, but we were only able to make a working model at a UCAV scale, with it's weight and size.

"One question on your mind might be why we would use this over a VTOL like a Harrier or Su-37 E-Type, and the two-part answer is, first, that the control needed for a VTOL is far too great to trust to an AI, and second because it makes this plane far more economical.

"With a top-speed of mach 1.8, this plane can dogfight mostly anything your enemy will throw at you, and also works well at low-speeds as an anti-tank attacker.

"We will reveal more secrets about this excellent new creation, as well as others, as the conference continues"

Already in prototype testing is Raysia Marine Technology's new "Sea Raptor" fast attack submarine.

http://www.bateshome.com/jordan/searaptor.jpg
(Comparable to the Kilo-Class Attack Sub)

Displacement (tons): 2,900-3,450 tons Surfaced
3,076-3,950 tons Full load submerged
Speed (kts): 14-18 knots Surfaced
25-32 knots Submerged
Dimensions (m): 82 meters long
12m beam.
Propulsion: diesel and electric motors
2 x 1500 kW Diesel generators
1 x 7,500 shp Propulsion motor
1 x Raysian Electric RESIM-1802 Mid-to-rear Impeller System
Diving depth: 240 meters Operational
300 meters Maximum
17.5 meters Periscope
Endurance: 5,000 miles With snorkel (@ 15 knots)
300 miles Submerged (@ 3 knots)
25 miles At full run (@ 32 knots)
35 days Sea Endurance

Armament:
Missiles: 8 Strela-3 (SA-N-8 Gremlin) or
8 Igla (SA-N-10 Gimlet)
2 QAAM Launchers in sealed hatches
Torpedoes: 6/533 mm Torpedoe Tubes
18 VA-111 Torpedoes or
24 mines

Systems: radio communications
combat control information system
navigation system
1 MRK-50 (Snoop Tray-2)general purpose detection radar
MGK-400 Rubikon (Shark Teeth) active/passive Sonar
Brother System Telemetry (http://www.bateshome.com/jordan/brother.htm)
2 Periscopes
[one for commander, one for air defence]

With the rapidly increasing size of Raysian Navy ships, such as the Cowdery-Class, or more importantly the Mobile Seaborne Airstrip, the need for a powerful tugboat has emerged.

This task requires a LOT of power, along with speed.

In final development stages at RMT is this HyperTug:

http://www.bateshome.com/jordan/mule.jpg

Crew: 45
Length overall: 101m
Beam: 20m
Displacement (weight): 5,500 tons
Maximum Tow Displacement: 1,000,000 tons
Maximum Speed with MSA Unit Barge (Appx. 900,000 tons): 25 knots
Range: 10,000 nautical miles at 20 knots (light)
Draft: 14.5 feet (light); 17 feet (loaded).
Ocean Capabale: Most Definately
Propulsion: 4 Nuclear Reactors, powering a Series of High-Speed/High-Power impeller turbines (Intakes water near midsection, shoots it out the back with hundreds of tons of force)

Yo Raysia! You just keep getting better! (curese you and your 3D computer skillz :wink: )

The water spray on your new Hyper Tug is really amazing and the layers of detail on the Tug itself is even better. Your new Über Submarine also looks very nice, though the head may be a bit too 'blunt' but that may just be the angle were looking at it.

Back to your Tug... If you really need a system for moving your increasingly Massive ships around, Id recomend taking a look at the 'M.A.T.S.' system im using for my New SuperShip Edselon.
http://www.nationstates.net/forum/viewtopic.php?p=3138206

********************************
Mobile Aquatic Tug Submarine or
M.A.T.S.

These are basically, Immensely powerful underwater tugs attached by
rotatable gimbals to the ships hull. The ship has eight MATS that are all
independently controlled by computer. The MATS in theory could let the
Massive Edselon rotate a complete 360 in a virtual zero turning radius.
********************************

as for the sub nose, it's up for redesign.

But the Tug? meh, it's powerful enough as is ;)

Should I make the tug submersible? The design looks like it could handle underwaterness :)

The usefullness of a submersiable Tig is really only if its attached to the ship, or under the ships control... Tugs are really designed to stear ships into and out of port at slow speeds that a Large ship would not normally be able to turn properly.

My MATS are designed actually to replace physical stearing systems such as massive rudders with multipy moveable minitugs to give a massive ship a far greater turn rate and quicker response to stearing huge ships both in and out of port.

The usefullness of a submersiable Tig is really only if its attached to the ship, or under the ships control... Tugs are really designed to stear ships into and out of port at slow speeds that a Large ship would not normally be able to turn properly.

My MATS are designed actually to replace physical stearing systems such as massive rudders with multipy moveable minitugs to give a massive ship a far greater turn rate and quicker response to stearing huge ships both in and out of port.Well, my tugs are meant to BE the engines for otherwise immovable barges... ones that displace over 1,000,000 tons.

Tagged

Ray you got any good pictures of an underwater submarine aircraft carrier?

Ray you got any good pictures of an underwater submarine aircraft carrier?.......uhhh... I wouldn't know where/how to begin... I've already been reminded several times that i have NFC what I'm doing when drawing subs lol

Ray you got any good pictures of an underwater submarine aircraft carrier?.......uhhh... I wouldn't know where/how to begin... I've already been reminded several times that i have NFC what I'm doing when drawing subs lol

LOL just curious if you had any hidden in an archive somewhere.

Ray you got any good pictures of an underwater submarine aircraft carrier?.......uhhh... I wouldn't know where/how to begin... I've already been reminded several times that i have NFC what I'm doing when drawing subs lol

LOL just curious if you had any hidden in an archive somewhere.Umm... yeah :P

http://www.bateshome.com/jordan/ummmyeah.jpg

lol does that work? :P

Not really but thanks anyway.

http://www.theforsakenoutlaw.com/Graphics/Nation-States/Export/Sentinel.gif

This will just have to do.

Not really but thanks anyway.

http://www.theforsakenoutlaw.com/Graphics/Nation-States/Export/Sentinel.gif

This will just have to do.I suppose I could MAKE one... got a bigger pic?

Good lord, Raysia, you've got more than one corporation! It's amazing! :lol: Anyways, good work.

Ah, nevermind...AdamWorks is an RMT subsidiary, then?

Good lord, Raysia, you've got more than one corporation! It's amazing! :lol: Anyways, good work.RMT= Modern Tech Corporation
CC= Future Tech Corporation

That's it ;)